A fire extinguisher is a necessity when it comes to fire control and prevention against outbreaks. These fire extinguishers allow people to put out fires in their early stages, saving them from property and life damage. However, poor fire extinguisher maintenance is one of the most undermined elements of fire extinguisher use.
People don’t understand the importance of regular maintenance, which even endangers their lives in serious situations. According to statistics, more than 90% of fire deaths occur because the fires don’t get controlled timely because of poor fire extinguishers.
While the law requires every commercial building to have a fire extinguisher—one without proper servicing won’t help you in time of need.
Basics of Fire Extinguisher Maintenance
Most property owners don’t even know the basics of fire extinguisher servicing, landing them in serious trouble. If you can relate to this problem, don’t worry. We will discuss the basics of fire extinguisher maintenance in this article to help you get started.
· Start with the Inspection Tag
The inspection tag or record provides a history of the device’s inspections and services. It is essential to fire extinguisher maintenance and can provide users with sufficient information about the extinguisher. This tag or record is normally stored in a designated logbook or affixed to the fire extinguisher directly. If the inspection tag is not visible, it’s best not to use the extinguisher.
· Check the Location of the Extinguisher
The property owners should check the extinguisher’s location, ensuring a fire extinguisher will work properly in an emergency. Placing the fire extinguisher in the right spot can significantly impact how fast and successfully a fire is controlled. For starters, the extinguishers should be easily available to all. This way, the fire can be controlled from almost every direction.
· Check the Tamper Seal and the Safety Pin
The fire extinguisher can assist in an emergency if the tamper seal and safety pin work properly. The safety and effective operation of the extinguisher depends on the tamper seal and safety pin, so never overlook its maintenance.
A thin wire or plastic component known as the tamper seal holds the safety pin in place. This seal also shows whether the fire extinguisher has been used or tampered with. The safety pin, however, is a metal part that stops the fire extinguisher from accidentally discharging. Both these elements are necessary for your fire extinguisher user when a fire breaks out.
· Check the Pressure Gauge
The pressure gauge showcases the level of extinguishing chemical pressure inside the cylinder. It is a crucial part of a fire extinguisher and can be a lifesaver. Effective fire suppression requires an appropriately pressurized extinguisher. So, always cross-check the pressure gauge and determine your distance from the fire accordingly. Always stay at a safe distance.
Bottom Line
Chicago fire safety can become a serious issue without proper guidance. We recommend following the basics mentioned to take care of your extinguishers. If you’re still unsure, feel free to connect with the professionals at Connected Fire. We will guide you on it to ensure better safety against fire breakouts.